Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-328 © SAMSUNG Electronics Co., Ltd.
841 System IP Options
This MMC provides various proprietary Samsung VoIP and IP integration options.
The options set in this MMC are system-wide.
There 9 option categories are list :
No Option Description
0 PHONE VERSION Sets running IP-based phone and new phone software version with
the system. Defaults are 0000.
0 2 LINE ITP : 2 line LCD IP phone
1 LARGE ITP : Large LCD IP-based phone
2 2LINE ITP2 : line LCD IP-based phone
3 WIPM APPL : Wireless IP-based mobile phone software.
4 WIPM BOOT : Wireless IP-based mobile phone boot program.
1 PHONE TFTP IP Sets phone software upgrade TFTP server IP address.
Default is 0.0.0.0.
2 ITP REGISTRATION Defines the method that IP-based phones use to registration
themselves with the system.
0 TYPE : Defines the method that IP-based phones use to
registration themselves with the system. Default is SYS PSWD.
0 SYS PSWD : System will authenticate the IP-based phones
with the value contained within parameter ITP
REGISTRATION : PSWD within this same MMC.
1 ITP PSWD : System will authenticate the IP-based phones
according to entries made in MMC 840.
2 DISABLE : System will not authenticate IP-based phones at all.
1 PSWD : This is a system-wide password value used for
registration of IP phones. Default is ‘1234’.
3 EASYSET OPTION Sets EasySet link via LAN option with the system.
0 PSWD : This is a system-wide password value used for
authentication of EasySet server. Default is ‘1234’.
1 ALIVE TIME : This is a EasySet link via LAN alive check timer.
Default is 0 SEC.
4 CTI LINK OPTION Sets CTI link via LAN option with the system.
0 SMDR REPORT : Sets YES or NO for SMDR data to CTI link via
LAN. Default is NO
1 ALIVE TIME : This is a CTI link via LAN alive check timer. If this
sets 0, the system will not check link alive. Default is 300 SEC.