Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-339
849 WLAN Regist
This MMC is used to enable or disable the register of a WIP500M mobile phone
within the WLAN. This MMC is also used to approve the WEP(Wired Equivalent
Privacy) enabling function where the WLAN is encrypted. The WEP key, which
must be used when WEP is enabled, can be configured with 16 characters or less.
Also, the MMC is used to set MAC addresses in the data terminal in order to use the
wireless LAN.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press the Transfer button, and press 849.
849: WLAN REGIST
SELECT PROG ID
2. Press the Speaker button to enter the select menu.
Enter the PASSCODE to activate the register.
ENTER PASSCODE
****
3. Select ENABLE to register the terminal to the
REGISTER WLAN.
WLAN REGISTER
ENABLE
4. Select the WEP KEY setting when
ENCRYPTION is selected.
WBS WEP SERVICE
DISABLE
5. Enter WEP KEY values when the WEP KEY is
set.
WEP KEY
6. Can clear the register status for each terminal also.
WIP REGIST CLEAR
3301:FORCED
7. Press the Soft button in the IP to change or
allocate a MAC address.
MAC LIST : 01
FFFFFFFFFFFF