Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-346 © SAMSUNG Electronics Co., Ltd.
853 Maintenance Busy
This MMC is used to place stations, trunks, and common resources equipment in a
maintenance busy condition. This can be used to isolate suspected intermittent
problem equipment. Stations placed in maintenance busy will behave like a station in
DND when called. The calling stations display(if equipped) will show ‘MADE
BUSY’ when called. The station display will still function with station and date.
When the busy station is accessed, it will function like a locked all station. Trunks
made busy can not originate calls. Common resource equipment such as DSP’s, CID
DSP's and miscellaneous equipment such as page port or voice mail port can also be
placed in a maintenance busy state.
MAINTENANCE BUSY OPTIONS
No Option Description
0 TRK Trunks
1 STN Stations
2 PAGE Page Ports
3 DTMFR DTMF Receiver(4/DSP)
4 CID CID Receiver(14/DSP)
5 CONF GRP #01-24
6 MGI MGI ports
In cases of DTMFR, CID or R2MFC DSP selection when DSP is not mounted display
will show NONE. If mounted display will show IDLE by default.
PROGRAM BUTTONS
!
VOLUME Scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor or select option
!
SPEAKER Used to advance next MMC
!
TRANSFER Exit