Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-348 © SAMSUNG Electronics Co., Ltd.
856 Tech Programming Logs
This MMC lists the date, time and entry location of the last eight times that
technician programming was accessed. This will allow a technician to determine if
there was unauthorised access to system programming and where this access
occurred. The information stored in this log will consist of 2 elements, the date and
time it occurred at and the access location.
There are 2 types of access location information as described below :
Type Description
NNNN This would be the extension number of a phone that had accessed programming directly.
LAN This would indicate that programming was accessed by PCMMC via the LAN
connection on the Motherboard.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 856
Display shows
(1) 11/22 11:03
"
201
:11/22 11:27
2. Enter index number(e.g., 3)
OR
(3) 11/22 12:30
"
203 :11/22 13:30
Press Volume button to scroll
3. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC