Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-353
890 Initialize Port
This program allows you to initialize items related to call process or DB for specific
station or Trunk line. This will return the port to default condition.
PROGRAM BUTTONS
!
VOLUME Used to scroll through system alarms.
!
KEYPAD Used to enter selections
!
SOFT Enter/leave option
!
SPEAKER Used to store data and move to next MMC
!
TRANSFER Enter/exit MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 890
Display shows
[201] CALL CLEAR
ARE YOU SURE?NO
2. Enter the station or Trunk line
OR
[202] CALL CLEAR
ARE YOU SURE?NO
Press Volume button to make selection and press
the Right Soft button to move cursor.
3. Enter 0 to call clear only or 1 to initialize port
OR
[202] DB INITIAL
ARE YOU SURE?NO
Press Volume button to make selection and press
the Right Soft button to move cursor.
4. Enter 1 for YES or 0 for NO
OR
[202] DB INITIAL
ARE YOU SURE?YES
Press Volume button to make selection and press
the Right Soft button to save and return step 2.
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
NONE
RELATED ITEMS
NONE