Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-14 © SAMSUNG Electronics Co., Ltd.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
A Acts as toggle between upper case and lower case
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 106
Display shows
[201] SPEED NAME
00:
2. Dial station number(e.g., 205)
OR
[205] SPEED NAME
00:
Press Volume button to select station and press
Right Soft button to move cursor
If selected station has no speed dial bins, the
display will be as shown and a new station may
[305] SPEED NAME
SPDBLK NOT EXIST
be selected
3. Dial speed dial location(e.g., 01)
OR
[205] SPEED NAME
01:_
Press Volume button to scroll through location
numbers and press Right Soft button to move
cursor
4. Enter the location name using the procedure
described above and press Right Soft button to
[205] SPEED NAME
01:SAM SMITH
return to step 2
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
NONE
RELATED ITEMS
MMC 105 STATION SPEED DIAL
MMC 606 ASSIGN SPEED BLOCK