Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00

Page 2-24 © SAMSUNG Electronics Co., Ltd.

111 Phone Ring Tone

Allows the system administrator or technician to select the ring tone heard at each

phone. There are eight ring tones available at each phone. A short tone burst of the

selection will be heard when the dial keypad is pressed.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 111

Display shows

[201] RING TONE

SELECTION 5

2. Dial phone number(e.g., 205)

[205] RING TONE

SELECTION 5

Press Volume button to select station and press

Right Soft button to move cursor

Press ANS/RLS button to select All

[ALL] RING TONE

SELECTION ?

3. Dial 1-8 to select ring tone

[205] RING TONE

SELECTION 5

Press Volume button to select ring tone and press

Right Soft button to move cursor

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

FREQUENCY 5