Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

112 Alarm Reminder Clock

Allows the system administrator or technician to set or change the alarm

clock/appointment reminder feature for any station. This must be done for single line

telephones, as they cannot access programming. Three alarms may be set for each

station and each alarm may be defined as a one-time or TODAY alarm or as a

DAILY alarm, as described below : The TODAY alarm is automatically cancelled

after it rings, while the DAILY alarm rings every day at the same time. Alarm

numbers are 1, 2 and 3. In the case of Secondary Pair assignments(MMC 220) the

alarm only rings the station that is programmed and does not ring the paired station.

No Alarm Mode Description

0 NOTSET No alarm

1 TODAY Alarm only once

2 DAILY Alarm daily at set time

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 112

Display shows

[201] ALM CLK(1)

HHMM:

NOTSET

2. Dial station number(e.g., 205)

[205] ALM CLK(1)

HHMM:

NOTSET

Press Volume button to select station and press

Right Soft button

3. Dial 1-3 to select alarm(e.g., 1)

[205] ALM CLK(1)

HHMM:

NOTSET

Press Volume button to select alarm and press

Right Soft button

4. Enter alarm time in 24-hour clock format

(e.g., 1300 for 1pm)

[205] ALM CLK(2)

HHMM:1300

NOTSET