Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

114 Phone Volume

Allows the station user or system administrator to set the ring volume, off hook ring

volume, handset receive volume, speaker volume, background music volume and

page volume for any or all phones.

No Item Description

0 RING VOL This is the volume setting for the phone ringer. There are eight

volume levels : level 1 is the lowest and level 8 the highest.

1 OFF-RING VOL This is the volume of the alert tone that tells you there is a call

camped on to your phone. There are eight volume levels : level 1 is

the lowest and level 8 the highest.

2 HANDSET VOL This is the volume setting for conversations on the handset receiver.

There are eight volume levels : level 1 is the lowest and level 8 the

highest.

3 SPEAKER VOL This is the receive volume setting for conversations on the speaker

phone of a phone. There are 16 volume levels : level 1 is the lowest

and level 16 the highest.

4 BGM VOL This is the volume you will hear background music over the phone

speaker at when your phone is idle and BGM is turned on. There are

16 volume levels : level 1 is the lowest and level 16 the highest.

5 PAGE VOL This is the volume you will hear internal page over the phone

speaker when your phone is idle and BGM is turned on. There are

16 volume levels : level 1 is the lowest and level 16 the highest.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

ANS/RLS Used to select ALL

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 114

Display shows

[201] STN VOLUME

RING VOLUME :4

2. Dial phone number(e.g., 205)

[205] STN VOLUME

RING VOLUME :4