Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

115 Set Programmed Message

Allows the system administrator to set a programmed message at any or all phones.

There are 20 messages available. The first ten are pre-programmed and the remaining

entries can be customized in MMC 715, Programmed Station Message. The last five

message are can be modified by each phone user.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 115

Display shows

[201] PGMMSG(00)

CANCEL PGM MSG

2. Dial station number(e.g., 205)

[205] PGMMSG(00)

CANCEL PGM MSG

Press Volume button to select station and

press Right Soft button to move cursor

Press ANS/RLS button to select All

[ALL] PGMMSG(??)

3. Dial an entry number to select message number

(e.g., 05)

[205] PGMMSG(05)

PAGE ME

Press Volume button to select message and press

Right Soft button to return to step 2

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

NO MESSAGES SELECTED