Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-33
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
A Acts as toggle between upper case and lower case
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 116
Display shows
[201] ALM REM(1)
HHMM:
"
NOTSET
2. Dial station number(e.g., 205)
OR
[205] ALM REM(1)
HHMM:
"
NOTSET
Press Volume button to select station and press
Right Soft button to move cursor
OR
Press ANS/RLS button to select all stations
[ALL] ALM REM(1)
HHMM:
"
NOTSET
3. Dial 1-3 to select alarm(e.g., 2)
OR
[205] ALM REM(2)
HHMM:
"
NOTSET
Press Volume button to select alarm and press
Right Soft button to move cursor
4. Enter alarm time in 24-hour clock format
(e.g., 1300 for 1pm)
[205] ALM REM(2)
HHMM:1300
"
NOTSET
Display will automatically advance to step 5
5. Dial valid entry from above list for alarm type
(e.g., 2)
[205] ALM REM
HHMM:1300
"
DAILY
OR
Press Volume button to select alarm type and
press Right Soft button to move cursor
6. Enter messages using above table and press Right
Soft button to return to step 2
[205] ALM REM
Sam SMITH
7. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC