Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-39
119 Caller ID Display
Allows the technician to set the individual station display preference on a per station
basis. Caller ID or CLI can be selected to either show the name, number first, or no
display depending on the type of call. Caller ID or CLI displays have the following
options :
No Display Type Description
0 NO DISPLAY No Caller ID or CLIP data will be displayed.
1 NUMBER FIRST The Caller ID or CLIP number received from the Central Office will
be displayed first.
2 NAME FIRST The Caller ID or CLIP name received will be displayed first.
In the case of CLIP the number must be programmed in the CLIP
translation table(MMC 728). CLIP does not provide names.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SPEAKER Used to advance next MMC
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 119
Display shows first station
[201] CID DISP
NUMBER FIRST
2. Enter station number(e.g., 205)
OR
[205] CID DISP
NUMBER FIRST
Press Volume button to scroll through stations and
press the Right Soft button to select a station
OR
Press ANS/RLS button to select ALL and press
[ALL] CID DISP
NUMBER FIRST
the Right Soft button.
3. Dial display option 0, 1 or 2(e.g., 2)
OR
[205] CID DISP
NAME FIRST
Press Volume button to select option and press
Right or Left Soft button to return to step 2