Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00

Page 2-48 © SAMSUNG Electronics Co., Ltd.

201 Change Customer Passcode

Used to change the passcode allowing access to MMC 200 Open Customer

Programming from its current value.

The passcode is four digits long. Each digit can be 0-9. The current (old) passcode is

required for this MMC.

PROGRAM BUTTONS

KEYPAD Used to enter passcodes

SPEAKER Save data and advance to next MMC

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 201

CUST. PASSCODE

NEW CODE:_

2. Enter new passcode via dial keypad

(maximum four digits)

CUST. PASSCODE

NEW CODE:****

3. Verify new passcode via dial keypad

CUST. PASSCODE

VERIFY :****

Passcode verified(go to step 4)

CUST. PASSCODE

VERIFY :SUCCESS

Passcode failure

Return to step 2

CUST. PASSCODE

VERIFY :FAILURE

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

PASSCODE : 1234