Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

202 Change Feature Passcode

Used to change the passcodes for the following features.

No Feature Description

0 RING PLAN This is the passcode required to place the system in different ring

plans(RP) or change the ring time override(RTO).

1 DISA ALARM This is the passcode required to clear a DISA ALARM generated

when the number of DISA attempts are exceeded.

2 WLI REGST This is the passcode required to registration of WIP phone.

The passcode is four digits long. Each digit can be 0-9.

PROGRAM BUTTONS

KEYPAD Used to enter passcodes

SPEAKER Save data and advance to next MMC

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 202

Display shows

CHANGE PASSCODE

RING PLAN :0000

2. Press Volume button to make selection. Press

Right Soft button to move cursor to passcode entry

CHANGE PASSCODE

DISA ALARM :5678

3. Enter new passcode via digits from dial keypad

CHANGE PASSCODE

DISA ALARM :9999

Press Right Soft button to return to step 2

Continue to change other passcodes

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC