Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00

Page 2-52 © SAMSUNG Electronics Co., Ltd.

204 Common Bell Control

Determines whether the common bell relay contacts have an interrupted or

continuous closure when activated. If interrupted is chosen, the relay follows an

internal Trunk Line ring pattern of one second closed followed by three seconds

open.

If assigned dry contact to common bell, common bell relay pairs are assigned as 362.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 204

Display shows current setting

[362]COM. BELL

CONTINUOUS

2. Dial common bell number

[362]COM. BELL

CONTINUOUS

Press Volume button to make selection of

common bell numbers and press Right Soft

button to advance cursor

3. Dial 0 for continuous or 1 for interrupted

operation

[362]COM. BELL

INTERRUPTED

Use Volume button to scroll through options and

press Right Soft button to return to step 2

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

CONTINUOUS