Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-56 © SAMSUNG Electronics Co., Ltd.
207 Assign VM/AA Port
Enables SLI ports to be designated as NORMAL or VMAA. VMAA ports receive
digits designated in MMC 726 VM/AA Options and also receive a true disconnect
signal upon completion of a call. Only SLI ports, not key daughter board, support
disconnect signal. Do not make VMAA ports data; this will return them to a single
line port and stop voice mail integration. VMAA ports have the equivalent of data
protect written in the program and are protected against tones.
This MMC is not used to assign voice mail port. Voice mail port is assigned
automatically when the system detects a SVM-400.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 207 Display shows
[209] VMAA PORT
NORMAL PORT
2. Dial station number(e.g., 205)
OR
[205] VMAA PORT
NORMAL PORT
Press Volume button to select station and press
Right Soft button to move cursor
3. Dial 1 or 0 to select port type
(1=VMAA, 0=NORMAL)
[205] VMAA PORT
VMAA PORT
Press Volume button to select option and press
Right Soft button
4. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC