Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-58 © SAMSUNG Electronics Co., Ltd.
208 Assign Ring Type
Provides the flexibility to program single lines to have ICM ringing, Trunk Line
ringing and data secure. With the many types of external ringing devices, all
configurations can be met. All devices will also have a positive disconnect signal.
Do not make VM/AA ports data; this will return them to a single line port and stop
voice mail integration.
No Ring Type Description
0 ICM RING Follows normal SLI ring cadence.
1 CO RING Follows Trunk line ring cadence.
2 DATA RING Follows Trunk line ring cadence and not supports off hook ring.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 208
Display shows
[209] RING TYPE
ICM RING
2. Dial station number(e.g., 205)
OR
[205] RING TYPE
ICM RING
Press Volume button to select station and press
Right Soft button to move cursor
3. Dial 1,2 or 0 to select port type(e.g., 2)
OR
[205] RING TYPE
DATA RING
Press Volume button to select option and press
Left or Right Soft button to return to step 2 above
4. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC