Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

210 Customer On/Off per Tenant

Allows the system administrator to set in system features on a per-tenant basis.

Each system option has a corresponding dialing number, as listed below : All options

toggle ON/OFF.

No Option Default Description

00 DISA PSWD OFF When ON, a caller must enter extension number and DISA

password when they call a DISA trunk. When OFF,

extension number and DISA password are not required

and the caller has full access to all features allowed on this

trunk.

01 LCR ENABLE OFF This option determines whether the system will or will not

route outgoing calls based on the information in the LCR

routing tables

02 CID CODE INS OFF When ON, the system will insert the country code when

receiving CID information. This feature can use the CID

display call back feature.

03 DISA MOH OFF When ON, outside parties will hear trunk MOH instead of

dial tone from the time the system answers a DISA trunk

until the caller dials a digit.

04 TRANSFER MOH OFF When ON, outside parties will hear trunk MOH instead of

ring back tone from the time a transfer is completed until

the call is answered by an internal party.

05 DID BSY ROUT OFF When ON, a DID call directed to a busy station will re-

route to the destination in MMC 406 for that trunk if CW is

set to OFF in MMC 714. If the CW option is set to ON the

call will camp on. When OFF and the CW option is set to

OFF, the call will re-route to the operator.

06 RECALL PIKUP OFF When ON, a call recalling to a station can be picked up

using Direct Call Pickup, Pickup Group and My Group

features. This applies to held calls recalling and

transferred calls recalling to a station.

This applies to held calls recalling and transferred calls

recalling to a station.

07 ICM EXT FWD OFF When ON, call forward external is allowed when intercom

calls are placed to a station that has Call Forward External

programmed and set.

08 DID ERR TONE OFF This option was added to provide error tone when an

invalid DID number is received.

09 KTS DISC ALM OFF When ON, generates system alarm when a phone

disconnect or connect.