Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

No Option Default Description

24 VOIP MFRALOC OFF When ON, a MFR assigned for VoIP tandem call

when a call incoming from VoIP trunk to another

trunk outgoing.

25 NTWK AUTOTMR OFF When OFF, a call duration timer disabled via

networking intercom call.

26 USE EURO OFF When ON, a call cost display by euro currency.

27 REDIAL REVW OFF When ON, the CALL LOG review status will be

appeared when LNR button is pressed.

28 ISDN KEYFAC OFF When ON, if phone user press ‘*’ or ‘#’ during

conversation via BRI trunk, system send information

message instead of digit message.

29 CHK SPV TRK OFF When ON, if both trunks don’t have supervision

feature then cannot make outgoing transfer or

unsupervised conference.

30 PRE FWD BUSY OFF When ON, a call arrives busy station, that is not set

forward busy, if preset no answer destination is

available, a call re-route to that destination

immediately.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 210

Display shows

TEN. ON AND OFF

DISA PSWD :OFF

2. Dial option number(e.g., 00)

Press Right Soft button to move cursor

TEN. ON AND OFF

DISA PSWD :OFF

3. Dial 1 for ON or 0 for OFF

TEN. ON AND OFF

DISA PSWD :ON

Press Volume button to make selection and

press Right Soft button