Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-68 © SAMSUNG Electronics Co., Ltd.
217 Traffic Report Option
This MMC is used to print a traffic report and select options. The traffic report can be
printed upon demand, every hour, at a programmed time of each day, or up to three
separate timed shifts. Automatic printing will always clear the totals.
When report
MANUAL PRINT OUT
is selected, the options are :
Option Description
PRINT AND CLEAR A report is printed and all totals are reset to 0.
PRINTOUT ONLY A report is printed and all the totals are saved.
CANCEL PRINTOUT The program return to previous menu if no report is ended.
When
AUTO PRINT OPTN
is selected, the options are :
Option Description
AUTO PRINT OFF Automatic print feature is disabled.
DAILY A report is printed at a programmable time every day and all the totals are
reset to ‘0’
EVERY HOUR A Traffic report will be printed every hour
TIME SHIFTS Up to three separate Start and End times may be programmed to report
traffic within certain times of a day. A report is printed at the end of each
End time and all totals are reset to ‘0’
When a report is printed, the totals represent call statistics accumulated from the date
of the last report stated as BEGINNING : D & T up to the date of this printout stated
as ENDING D & T. See the sample report at the end of this MMC.
If there are no trunks in a group, the trunk group report for that group will not print.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry