Installation guide

CHAPTER 2. MMC Programming OfficServ 7400 Programming Guide
Samsung Business Communications
2-203
[706] SYSTEM SPEED DIAL BY NAME
Allows a name up to 11 characters to be entered for each system speed dial location.
This name enables the speed dial number to be located when using the directory dial fea-
ture.
ENTERING CHARACTERS
Refer to ENTERING CHARACTERS in MMC 104, STATION NAME.
DEFAULT DATA
NO NAMES
PROGRAM BUTTONS
ANS/RLS Used to save the speed dial number and name to the CID translation
table (MMC 728).
ACTION DISPLAY
1. Press Transfer button and enter 706.
Display shows:
SYS SPEED NAME
500:
2. Dial system speed entry number (e.g., 505)
OR
SYS SPEED NAME
505:
Press Volume button to select entry number and
press Right Soft button to move cursor.
3. Enter name using dial keypad and press Right Soft
button to return to step 2.
SYS SPEED NAME
505:TELECOMS
OR
Press the F key to return to MMC 705, step 3.
SYS SPEED DIAL
505:
4. If you want to save the speed dial number and name
data to the CLI translation table (MMC 728),
SYS SPEED NAME
ADD CLI XLT ?NO
press ANS/RLS button and dial 1 for YES.
(The speed dial number must exist)