Operating instructions

Customizing the Picture
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
and Tint settings of your PDP.
41
1
Press the Menu button, then press the joystick to
enter.
2
Move the joystick left or right to select “Custom”,
“Dynamic”, “Standard” or “Movie” picture setting.
• You can select “High”, “Middle”, “Low” or
“Custom” in PC/DVI mode.
3
Press the Menu button to exit.
Using Automatic Picture Settings
Your PDP has automatic picture settings that allow you to adjust the video display easily.
Picture
Mode
Adjust
Color Tone
Move Select Exit
Custom
Custom
Picture
Mode
Adjust
Color Tone
Move Select Exit
Dynamic
Custom
40
1
Press the Menu button, then press the joystick to
enter.
2
Move the joystick up or down to select “Adjust”,
then press the joystick to enter.
You will also see the items “Contrast”, “Brightness”,
“Sharpness”, “Color” and “Tint”.
3
Move the joystick up or down to select the item you
wish to change.
4
Move the joystick left or right to change the value of
the item.
5
Press the Menu button to exit.
Note
• In the PC/DVI mode, you can’t adjust the Sharpness, Color and Tint.
• The Tint doesn’t operate in Component(480p, 720p, 1080i) mode.
Picture
Mode
Adjust
Color Tone
Move Select Exit
Custom
Custom
Picture
Mode
Adjust
Color Tone
Move Enter Exit
Custom
Normal
Adjust
Contrast
Brightness
Sharpness
Color
Tint R 50 G 50
Move Adjust Exit
80
50
50
50
82Contrast
Quick way to access the picture setting: Just
press the “P.Mode” button on the remote control.
!