Operating instructions

69
Adjusting the PC Screen
68
Adjusting the R.G.B
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
1
Press the Menu button, then press the joystick to
enter.
2
Move the joystick up or down to select “Color
Tone”, then move the joystick left or right to select
“Custom”. When “Custom” is selected, the word
“Color Adjust” will appear on the screen.
3
Move the joystick up or down to select “Color
Adjust”, then move the joystick to enter.
4
Move the joystick up or down to select the item you
want to change, then move the joystick right or left
to change the value of the item, using the on-screen
gauge as your guide.
5
Press the Menu button to exit.
Picture
Mode
Adjust
Color Tone
Color Adjust
Move Select Exit
Custom
Custom
Picture
Mode
Adjust
Color Tone
Color Adjust
Move Select Exit
Custom
Custom
Picture
Mode
Adjust
Color Tone
Color Adjust
Move Enter Exit
Custom
Custom
Adjust
Red
Green
Blue
Move Adjust Exit
50
50
50
82Red
Changing the Position of the Image
After connecting the PDP to your PC, adjust the position of the screen if it is not well-aligned.
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
1
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
2
Press the joystick to enter, then adjust the screen
position by using the joystick button.
3
Press the Menu button to exit.
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move Enter Exit
Wide
Position
Move Move Exit