Operating instructions

73
Coarse Adjustment
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
1
Press the Menu button, move the joystick up or
down to select “PC”, then press the joystick to enter.
2
Move the joystick up or down to select “Adjust”,
then move the joystick left or right to enter.
3
Move the joystick up or down to select “Coarse”.
Remove picture noise (vertical stripes) on the screen
by moving the joystick left or right. (If Coarse is
not set properly, vertical stripes will appear on the
screen.)
4
Move the Menu button to exit.
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move Enter Exit
Wide
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move Enter Exit
Wide
Adjust
Corase
Fine
Move Adjust Exit
50
7
53Coarse
72
Picture Quality Adjustment
Picture Automatic Adjustment
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
1
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
2
Move the joystick up or down to select “Auto
Adjust”, then move the joystick left or right to enter.
3
The message “Auto Adjust” appears on the screen
and the picture adjustments are automatically
activated.
4
Press the Menu button to exit.
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move Enter Exit
Wide
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move Enter Exit
Wide
Auto Adjust