Quick Guide (ver.1.0)

English - 26

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the

TV to fall. In particular, ensure your children do not hang on or

destabilize the TV. Doing so may cause the TV to tip over, causing

serious injuries or death. Follow all safety precautions provided

in the Safety Flyer included with your TV. For added stability

and safety, you can purchase and install the anti-fall device as

described below.

To Avoid the TV from Falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the wall. Conﬁrm that the screws have been

ﬁrmly installed onto the wall.

✎

You may need additional material such as an anchor depending on the type of wall.

✎

Since the necessary clamps, screws, and string are not supplied, please purchase these

additionally.

2. Remove the screws from the back center of the TV, put the screws into the clamps, and then fasten the

screws onto the TV again.

✎

Screws may not be supplied with the product. In this case,

please purchase the screws of the following specifications.

✎

Screw Specifications

• For a 43 - 64 inches models: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto

the wall with a strong cable and then tie the string tightly.

✎

NOTE

− Install the TV near to the wall so that it does not fall

backwards.

− It is safe to connect the string so that the clamps ﬁxed on

the wall are equal to or lower than the clamps ﬁxed on the

T V.

− Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check the

connections for any sign of fatigue or failure. If you have any doubt

about the security of your connections, contact a professional

installer.

[PF5500-ZA]BN68-04891A-06ENG.indb 26 2013-10-28 �� 2:43:10