Quick Guide (ver.1.0)

English - 6
Making Connections
Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the
power cord to the TV, and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable
or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an
antenna or a cable connection.
• For the best picture and audio quality, connect digital devices using an HDMI cable.
• If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If
this occurs, ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
• PC/DVI AUDIO IN input is not supported.
• For a set-top box connection using an HDMI cable, we highly recommend you connect the cable to the HDMI IN
1(STB) port.
• For an HDMI to DVI cable connection, you must use the HDMI IN 2(DVI) jack.
• If you connect a device to the HDMI IN 2(DVI) port using an HDMI to DVI cable, the audio will not work. DVI does not
transmit audio. You must add a separate audio connection.
• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 2(DVI)
jack on the TV. Use the PC's speakers for audio.
HDMI OUT
OPTICAL
VIDEO OUT
W RY
Y
AUDIO OUT
R-AUDIO-L
AUDIO OUT
R-AUDIO-L
PR PB Y
COMPONENT OUT
W
R RB
R
G
R
W
R
W
R B
R
G
DVI OUT
VHF/UHF
Antenna
Cable
or
TV Rear Panel
TV Side Panel
VCR
AV connection
Blu-ray player / DVD
Component connection
Set-top box / Blu-ray player
HDMI connection
PC connection
(Using an HDMI (to DVI) Cable)
Digital Audio System
Audio connection
✎ The position of the port may
differ depending on the model.
✎ The Plasma TV may interfere with
amateur radio or AM radio.
✎ Using two-way radio mobile or
portable units, amateur radio, or
AM radio near your TV may cause
the TV to malfunction.
USB connection
✎ The TV does not support
HDDs (Hard Disk Drives)
connected to the USB port.
To see Analog channels clearly,
prevent the antenna cables from
contacting the rear of the TV.
Connect the antenna cables
directly without using a divider.
[PH4500-5000-ZA]BN68-05661A-00ENG.indb 6 2014-01-03  10:30:43