User Manual
Table Of Contents
- overview
- outdoor vandal dome camera
- indoor dome camera
- flush mount dome camera
- outdoor bullet camera
- box camera
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
installation & connection
42_ installation & connection
CONNECTING WITH OTHER DEVICE
<PNV-A6081R/PND-A6081RV/PND-A6081RF>
Ethernet
Monitor for installation
Power
WiFi dongle
<PNO-A6081R>
SOFT
AP
Monitor for installation
Ethernet
Power
WiFi dongle
<PNB-A6001>
1 : ALARM 1
2 : ALARM 2
3 : GND
4 : ALARM OUT
(12V 50mA)
5 : GND
6 : RS-485+
7 : RS-485-
2
1
3
4
5
6
7
RESET
VIDEO
USB
AUDIO
OUT
AUDIO
IN
FOCUS
NETWORK
PoE+
DC 12V
SOFT
AP
Monitor for installation
Ethernet
Grounding cable
Power
WiFi dongle
J
`
The Test Monitor Out port of the product is provided for easier installation, and is not recommended for monitoring purposes.
`
The Micro USB port of the product is provided for easier installation, and is not recommended for monitoring purposes.