Operation Manual

English - 11
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes. N
1. Press the POWER button on the remote control. You can set the menu language. menu is automatically displayed. Select the
appropriate language by pressing the ▲ or ▼ button.
Press the ENTER
E
button to conrm your choice.
2. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E
button.
We recommend setting the TV to
N Home Use mode for the best picture in your home
environment.
Store Demo
N mode is only intended for use in retail environments.
If the unit is accidentally set to
N Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3. Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
E
button to conrm
your choice.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection, then press the ENTER
E
button.
Air: • Air antenna signal.
Cable: • Cable antenna signal.
5. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER
E
button to select Start.
Digital & Analogue • : Digital and Analogue channels.
Digital • : Digital channels.
Analogue • : Analogue channels.
For more de
N tailed description of selecting Cable mode,, refer to page 12.
The
N
channel search will start and end automatically.
Pr
N
ess the ENTER
E
button at any time to interrupt the memorization process.
A
N
fter all the available channels are stored, the message Set the Clock Mode. is displayed.
6. Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then Press the ENTER
E
button.
If
N
you select Manual, Set current date and time is displayed. (refer to page 27)
If
N
you have received a digital signal, the time will be set automatically. If not, see page 27 to set the clock.
7. The brief instruction on How to get the best performance from your new HDTV. is displayed. Press the ENTER
E
button.
Th
N
is menu is available HD Connection Guide in the Support menu.
8. The message Enjoy your TV is displayed. When you have nished, press the ENTER
E
button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, refer to 25 page.
N
The N Plug & Play feature is only available in the TV mode.
Setup
Plug & Play
►
Menu Language : English
Time
Broadcast
Security
General
Plug & Play
You can set the menu language.
U Move E Enter
▲
Nederlands
English
Eesti
▼
Menu Language :
BN68-02354A-Eng.indb 11 2009-10-23 �� 6:05:36