Operation Manual
English - 19
Film Mode
You can optimize the picture mode for watching movies.
Off • : Basic video image processing applied and No auto-detection for lm-based programs.
Auto • : Automatically adjusts for the best image quality between lm and video programs.
Screen Burn Protection
Congures the Screen Burn Protection Options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Pixel Shift • : To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down (Vertical) and side to side (Horizontal). The Time setting allows you to
program the time between movement of the picture in minutes.
Set
N
Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTEREbutton.
Select the required option by pressing the ▲ or ▼ button, then press the
N
ENTERE button.
Available options:
N
Horizontal, Vertical, Time.
Optimum condition for pixel shift
N
Item TV/Ext/AV/Component/HDMI/PC
Horizontal 0~4 2
Vertical 0~4 2
Time (minute) 1~4 min 3 min
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
N
This function is not available in the
N
Screen Fit mode.
Scrolling • : This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern
Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image
on the screen for a long time.
Side Grey • : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides.
Dark - : When you set the screen ratio to 4:3, it darkens the left and right sides.
Light - : When you set the screen ratio to 4:3, it brightens the left and right sides.
BN68-02354A-Eng.indb 19 2009-10-23 �� 6:05:39