Operation Manual
English - 27
Setting the Time
Clock
❑
Setting the clock is necessary in order to use the various timer features of the TV.
The current time will appear every time you press the
N INFO button.
If you disconnect the power cord, you have to set the clock again.
N
Clock Mode
You can set up the current time manually or automatically.
Auto • : Set the current time automatically using the time from the digital broadcast.
Manual • : Set the current time to a manually specied time.
Clock Set
You can set the current time manually.
Set up this item when you have set
N Clock Mode to Manual.
You can set the
N Day, Month, Year, Hour, Minute directly by pressing the number
buttons on the remote control.
Sleep Timer → Off / 30 min / 60 min / 90 min / 120 min / 150 min /
❑
180 min
The sleep timer automatically shuts off the TV after a preset time.
The TV automatically switches to standby mode when the timer reaches 0.
N
To cancel the N Sleep Timer function, select Off.
Press the
T
TOOLS button to display Tools menu.
You can also set the sleep timer by selecting Tools → Sleep Timer.
Timer 1 / Timer 2 / Timer 3
❑
Three different on / off timer settings can be made.
On Time :
Set the hour, minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Off Time :
Set the hour, minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Volume
:
Set the required volume level.
Antenna
: You can select either DTV or ATV when the TV turns on automatically.
Channel
:
Select the desired channel.
Repeat
:
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, or Manual.
When
N
Manual is selected, press the ► button to select the desired day of the week. Press the ENTER
E
button over the
desired day and the c mark will appear.
You must set the clock rst.
N
You can set the hour, minute and programme by pressing the number buttons on the remote control. N
Auto Power Off N
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on
by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long
time.
Setup
Plug & Play
Menu Language : English
Time
►
Broadcast
Security
Network
General
Time
Clock : -- : -- ►
Sleep Timer : Off
Timer 1 : Inactivated
Timer 2 : Inactivated
Timer 3 : Inactivated
U
Move
E
Enter
R
Return
BN68-02354A-Eng.indb 27 2009-10-23 �� 6:05:43