User Manual

37
English
Anynet+
Setting Up Anynet+
Option Description
Setup
Anynet ■
+
(HDMI-CEC) → Off / On
To use the Anynet
+
Function, Anynet
+
(HDMI-CEC) must
be set to On.
When the
• Anynet
+
(HDMI-CEC) function is disabled,
all the Anynet
+
related operations are deactivated.
Auto Turn Off ■ → Yes / No
Setting an Anynet+ Device to turn Off automatically when
the TV is turned Off.
The active source on the TV remote must be set to
•
TV to use the Anynet
+
function.
If you set
• Auto Turn Off to Yes, connected external
devices are also turned off when the TV is turned off.
If an external device is still recording, it may or may
not turn off.
Scanning and Switching
between Anynet+ Devices
1
Press the TOOLS button. Press the ENTERE button to select
Anynet+ (HDMI-CEC).
2
Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet+ devices connected to the TV are listed. If you cannot find a device ■
you want, press the red button to scan for devices.
Only when you set ■ Anynet+ (HDMI-CEC) to On in the Setup menu, the
Device List menu appears.
3
Press the ▲ or ▼ button to select to a particular device and press the ENTERE
button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot ■
cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of ■
connected devices.
When the device scan is complete, the number of devices found are not ■
displayed.
Although the TV automatically searches the device list when the TV is turned ■
on via the power button, devices connected to the TV when the TV is on or
under some conditions are not automatically displayed in the device list. Press
the red button to search for the connected device.
If you have selected external input mode by pressing the ■ SOURCE button,
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
Press the ■ TOOLS button to
display Tools menu.
You can also display Anynet+
menu by selecting Tools →
Anynet+(HDMI-CEC).
Anynet+ (HDMI-CEC) : ON
Auto Turn Off : Yes
U Move E Enter R Return
Setup
Off
On
View TV
Device List
Record : DVDR
DVDR MENU
DVDR INFO
Receiver On
Setup
U Move L Adjust R Return
BN68-02354D.indb 37 2009-06-30 �� 10:21:14