User Manual

English - 52
Setting Up Anynet
+
The following settings are to use Anynet
+
functions.
Using the Anynet
+
Function
1 Press the MENU button to display the menu. Press the ▲ or ▼
button to select Input, then press the ENTER button.
2 Press the ▲ or ▼ button to select Anynet
+
(HDMI-CEC), then
press the ENTER button.
3 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
4 Press the ▲ or ▼ button to select Anynet
+
(HDMI-CEC), then
press the ENTER button.
5 Press the ▲ or ▼ button to select On, then press the ENTER
button.
➢
The Anynet
+
(HDMI-CEC) function is enabled.
➢
If you select Off, Anynet
+
(HDMI-CEC) is disabled.
➢
When the Anynet
+
(HDMI-CEC) function is disabled, all the
Anynet
+
related operations are deactivated.
Turning an Anynet
+
Device Off Automatically when the TV is
Turned Off
4 Press the ▲ or ▼ button to select Auto Turn Off, then press
the ENTER button.
5 Press the ▲ or ▼ button to select Yes, then press the
ENTER button.
➢
The Auto Turn Off function is enabled.
➢
If you select No, the Auto Turn Off function is canceled.
Press the EXIT button to exit.
➢
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet
+
function.
➢
If you set Auto Turn Off to Yes, connected external devices
are also turned off when the TV is turned off. However, if the
device is recording, it may not be turned off.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ENTER button to select Anynet+ (HDMI-CEC).
Scanning and Switching between Anynet
+
Devices
1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the
ENTER button.
2 Press the ▲ or ▼ button to select Anynet
+
(HDMI-CEC), then
press the ENTER button.
3 Press the ▲ or ▼ button to select Select Device, then press
the ENTER button.
4 Press the ▲ or ▼ button to select to a particular device and
press the ENTER button.
It is switched to the selected device.
5 If you cannot find a device you want, press the ▲ or ▼ button to select
Searching Connections, then press the ENTER button.
The meassage Configuring Anynet
+
connection... is displayed.
When searching devices completes, the connected devices are listed
in the Anynet
+
menu.
➢ 
Switching to the selected devices may take up to 2 minutes. You
cannot cancel the operation during the switching operation.
➢ 
The time required to scan for devices is determined by the number of
connected devices.
➢ 
When the device scan is complete, the number of found devices is not
displayed.
➢ 
Although the TV automatically scans devices when it is turned on using
the POWER button, devices connected when the TV is on or under a
specific circumstance are not displayed in the device list. Therefore
select Searching Connections menu to search devices.
➢ 
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet
+
function.
Make sure to switch to an Anynet
+
device by using the TOOLS button.
Continued...
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Move Enter Exit
Setup
Anynet
+
(HDMI-CEC) : Off
Auto Turn Off : Off
Searching Connections
Enter ReturnMove
Off
On
Enter
Move
View TV
Select Device 
Record

Menu on Device

Device Operation

Receiver :Off

Setup 
TV P 1
Return
Enter
Move
View TV
Select Device 
Record 
Menu on Device 
Device Operation 
Receiver :Off 
Setup 
TV P 1
Return
DVDR1
DVDR2
DVD1
DVD2
Setup
Anynet
+
(HDMI-CEC) : On
Auto Turn Off : : Off
Searching Connections
Enter ReturnMove
No
Yes
Setup
Anynet
+
(HDMI-CEC) : On 
Auto Turn Off : Yes 
Searching Connections 
Enter ReturnMove
BN68-01427C-Eng.indb 52 2008-04-22 오후 2:55:52