Plasma TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model BN68-02164A-Eng.indb 1 Serial No.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRALIA 1300 362 603 www.samsung.com/au CHINA 800-810-5858 400-810-5858 010-6475 1880 www.samsung.com/cn HONG KONG : 3698-4698 www.samsung.com/hk INDIA 3030 8282 1800 110011 1800 3000 8282 www.samsung.com/in INDONESIA 0800-112-8888 www.samsung.com/id JAPAN 0120-327-527 www.samsung.
User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height.
English Contents Connecting and Preparing Your TV Media Play-DLNA ■■ Checking Parts........................................................................... 4 ■■ Using the Stand-Base ............................................................... 4 ■■ How to assemble the Stand-Base (depending on the model).... 4 ■■ Viewing the Control Panel.......................................................... 5 ■■ Viewing the Connection Panel................................................... 6 ■■ Remote Control..
Connecting and Preparing Your TV Checking Parts Owner’s Instructions Remote Control/ AAA Batteries (2ea) Cloth-Clean Warranty Card/ Safety Guide Manual (Not available in all locations) Holder-Ring (4ea) (Refer to page 65) Cover-Bottom Screw (5ea) Holder-Wire Cable (Refer to page 66) Holder-Wire (3ea) (Refer to page 66) Ferrite Core for Power Cord Ferrite Core for Headphone Holder-Wire stand (Refer to page 66) Program CD Audio Cable (Not available in all locations) AV Cable Component Cable
Viewing the Control Panel Front Panel buttons NN The product colour and shape may vary depending on the model. Touch each button to operate. 4 < CH > Press to change channels. In the on-screen menu, use the < CH > buttons as you would use the ▲ and ▼ buttons on the remote control. 1 SOURCE Toggles between all the available input sources (TV, AV, Component, PC, HDMI1/DVI, HDMI2, HDMI3, HDMI4). NN In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
Viewing the Connection Panel TV Rear Panel 1 4 2 or 3 4 5 6 7 8 9 0 or Cable Television Network NN The product colour and shape may vary depending on the model. NN Whenever you connect an audio or video system to your set, ensure that all elements are switched off. NN When connecting an external device, match the colour of the connection terminal to the cable. English - 6 BN68-02164A-Eng.
1 service Connector for service. 8 PC IN / PC/DVI AUDIO IN 2 USB 1 (HDD), USB 2 9 HDMI IN 1(DVI), 2, 3, 4 -- No additional Audio connection is needed for an HDMI to HDMI connection. -- Whenusing an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. Connect to the video and audio output jack on your PC. Connect a USB mass storage device to view photo files (JPEG), play audio files (MP3) and movie files. You can connect to SAMSUNG’s network wirelessly.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. NN The performance of the remote control may be affected by bright light. 1 POWER button (turns the TV on and off) 2 Selects the TV mode directly. 3 Number buttons for direct channel access. 4 Use to select on-screen menu items 5 Use to display Channel Lists on the screen. 6 Displays the main on-screen menu. 7 Use to quickly select frequently used functions.
Installing Batteries in the Remote Control 1. 2. Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. NN Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment. NN Using the remote control with the ON/OFF( the battery usage time. 3. ) light button set to On will reduce Close the cover.
Viewing the Display The display identifies the current channel and the status of certain audio-video settings. 1. Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. 1 : 49 Thu 1 Jan ATV 13-1 NN Press the INFO button once more or wait approximately 10 seconds and it disappears automatically. Viewing the Menus 1. 2. NN The on-screen menus disappear from the screen after about one minute. Picture 3.
Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. NN The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running. NN The Screen Saver is activated if there is no operating signal for longer than 15 minutes. 1. 2. 3. Press the POWER button on the remote control. Language menu is displayed. Press the ENTERE button. Select the appropriate language by pressing the ▲ or ▼ button.
Channel Control Storing Channels ❑❑ Area Channel You can change the desired area. ❑❑ Auto Store Scans for all channels with active broadcast stations (and availability depends on your country) and stores them in the TV's memory. NN If you want to stop Auto Store, press the ENTERE button. The Stop Auto Store? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTERE button. Area : Asia/Europe ► Auto Store Manual Store Channel List Channel Mode : Added Ch.
Managing Channels ❑❑ Channel List Auto Store NN Select a channel in the All Channels, Added Channels, Favourites, or Programmed Channel List Channel Mode : Added Ch. Fine Tune All Channels screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel. •• All Channels: Shows all currently available channels. •• Added Channels: Shows all added channels. •• Favourites: Shows all favourite channels. •• Programmed: Shows all current reserved programmes.
Timer Viewing If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme set the current time first. (See page 23) NN Only memorized channels can be reserved. NN You can set the Channel, Date, or Start Time directly by pressing the number buttons on the remote control. NN Reserving a programme will be shown on Programmed menu.
Picture Control Changing the Picture Settings ❑❑ Mode Picture You can select the type of picture which best corresponds to your viewing requirements. •• Dynamic: Selects the picture for high-definition in a bright room. •• Standard: Selects the picture for the optimum display in a normal environment. •• Eco : Selects the picture for optimum and eye-comfortable display. •• Movie: Selects the picture for viewing movies in a dark room. TT Press the TOOLS button to display Tools menu.
White Balance You can adjust the colour temperature for more natural picture colours. •• R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: Changing the adjustment value will refresh the adjusted screen. •• Reset: The previously adjusted white balance will be reset to the factory defaults. Flesh Tone You can adjust the flesh tone to be more or less red. NN Changing the adjustment value will refresh the adjusted screen.
HDMI Black Level → Normal / Low You can directly select the black level on the screen to adjust the screen depth. NN This function is active only when the external input connects to HDMI (RGB signals). 1080 Full HD Motion Demo → Off / On Samsung' new generation PDP panels deliver stunning Full HD motion clarity when viewing fast action sports, movies, and games. Film Mode You can optimize the picture mode for watching movies. •• Off : Turn the Film Mode function off.
Viewing the Picture in Picture (PIP) Setup You can display a sub picture within the main picture of set program me or video input. In this way, you can watch the picture of set program me or video input from any connected equipment while watching the main picture. Melody : Medium Energy Saving : Off PIP ► NN You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. TT Press the TOOLS button to display Tools menu.
PC Display ❑❑ Setting Up Your PC Software (Based on Windows XP) 1. 2. 3. 4. The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Sound Control Changing the Sound Setting ❑❑ Mode Sound You can select the type of special sound effect to be used when watching a given broadcast. •• Standard: Selects the normal sound mode. •• Music: Emphasizes music over voices. •• Movie: Provides the best sound for movies. •• Clear Voice: Emphasizes voice over other sounds. •• Custom: Recalls your customized sound settings.
❑❑ Sound Select When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. •• Main: Use to listen to the sound of the main picture. •• Sub: Used to listen to the sound of the sub picture. NN You can select this option when PIP is set to On. ❑❑ Sound Reset Sound You can restore the Sound settings to the factory defaults. •• Reset All: All the sound values return to default settings. •• Reset Sound Mode: Current sound values return to defalt settings.
Function Description Configuring the Setup Menu ❑❑ Language Setup It is variable depending on the model. When you start using the television for the first time, you must select the language which will be used for displaying menus and indications. ❑❑ Game Mode Plug & Play Language : English ► Time When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.
Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Plug & Play Language Setup NN The current time will appear every time you press the INFO button. NN If you disconnect the power cord, you have to set the clock again. ❑❑ Clock You can set the current time manually. NN You can set the day, month, year, hour, or minute directly by pressing the number buttons on the remote control.
Source List / Edit Name ❑❑ Source List TV, AV, Component, PC, HDMI1/DVI, HDMI2, HDMI3, HDMI4. NN You can choose only those external devices that are connected to the TV. Input Use to select TV or other external input sources such as DVD players or Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.
Supported Program ❑ Product Guide Support The Product Guide gives you information on the most important features of this TV. • Mediⓐ2.0: Internet@TV-Content Service, Content Library Flash, USB2.
Media Play Connecting a USB Device 1. 2. Press the POWER button to turn the TV on. Connect a USB device containing photo, music and movie files to the USB jack on the rear of the TV. N If you enter the Media Play mode with no USB device connected the message No external storage device found. Check the connection status. will appear. In this case, insert the USB device, exit the screen by pressing the MEDIA.P button on the or remote control and enter the Media Play screen again.
Using the Media Play Function This function enables you to view and listen to photo, music and movie files saved on a USB Mass Storage Class (MSC) device. It might not work properly with unlicensed multimedia file ❑❑ Entering the Media Play Menu 1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2. Press the ▲ or ▼ button to select Media Play (USB&DLNA), then press the ENTERE button. NN The Media Play menu is displayed.
Using and Sorting Photo List You can sort photos in the Photo List by a particular standard. Photo Press the ▲ button twice, then press the ◄ or ► button to select a sorting standard in the Photo list. (Basic View, Timeline, Colour, Folder, Preference) Preference Basic View 2009 Mar ▶ ▶ Nov ▶ Press the by the user. Folder ◀ 2. (Play)/ENTERE (REW) or Colour Apr Jun 2009/5/15 1/67 NN The photos are sorted according to the newly selected sorting standard.
Information The photo file information including the name, the size, the resolution, the date modified and the path is displayed. NN You can view the information of photo files during a Slide Show using the same procedures. OO Alternatively, select a photo from the photo list and press the INFO button to view the information. Remove Safely You can remove the device safely from the TV. Viewing a Photo or Slide Show ❑❑ Viewing a Slide Show 1.
❑❑ Slide Show Tools Menu Stop Slide Show / Start Slide Show Tools You can start or stop a SlideShow. Slide Show Speed → Normal / Fast / Slow You can select the slide show speed only during the slide show. NN You can also change the speed of the Slide Show by pressing the (FF) button during the Slide Show.
Using and Sorting the Music List You can sort music files in the Music List by a particular standard. 1. Press the ▲ button twice, then press the ◄ or ► button to select a sorting standard in the Music list. (Basic View, Title, Artist, Mood, Genre, Folder, Preference) Music Preference Folder Basic View ▶ NN To move to the previous/next group, press the ▶ (FF) button. 3/4 Mr A-Z Press the ENTERE button to start playing music in the order selected by the user.
Playing a Music ❑❑ Playing a music file r 1. Pressing the ◄ or ► button to select a music file to be played. r 00:00:02 / 00:04:55 1/3 2. Press the (Play)/ENTERE button. r When I Dream NN This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed, even if they are saved on the same USB device. (REW) or (FF) buttons do not function during play. NN NN The selected file is displayed at the top with its playing time.
▶ Using and Sorting the Movie List Movie Preference Timeline Basic View NN The movie files are sorted according to the newly selected sorting standard. Press the the user. 1/5 (FF) button. (Play)/ENTERE button to play the movie in the order selected by NN The movies are sorted according to the newly selected sorting standard. ▶ 2.
Playing a Movie File r 1. Pressing the ◄ or ► button to select a movie to be played. 2. Press the (Play) / ENTERE button. 00:00:02 / 00:01:55 r ❑❑ Playing a movie file 1/3 MOVIE_000.avi NN The selected file is displayed at the top with its playing time. NN The playing duration of a movie file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the file. NN Press the ◄ button while playing a video file to rewind by 10 seconds.
❑❑ Playing the movie group 1. Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline, Title, Folder, Preference) 2. Press the (REW) or (FF) button to select the desired group. 3. Press the ▼ button twice, then press the TOOLS button. 4. Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button. NN Only the movie files in the sorting group including the selected files will be played. ❑❑ Playing the selected movie files 1.
Picture / Music Settings Using Media Play When watching a SlideShow or listening to music using Media Play, you can set the picture and sound. ❑❑ Picture Setting 1. Press the TOOLS button during a Slide Show or while music is playing. 2. Press the ▲ or ▼ button to select Picture Setting. 3. Press the ◄ or ► button to select the Picture Mode (Standard, Eco, Movie, or Dynamic). 4. Press the ▲ or ▼ button to move to an item.
Using the Setup Menu Setup displays the user settings of the Media Play menu. 1. 2. 3. 4. Media Play Press the MEDIA.P button on the remote control to display the Media Play menu. Press the ◄ or ► button to select Setup, then press the ENTERE button. Press the ▲ or ▼ button to select the desired option. Press the ◄ or ► button to select the option. 851.98MB/995.00MB Free SETUP NN To exit Media Play mode, press the MEDIA.P button on the remote control.
Media Play-DLNA Setting the DLNA Network DLNA allows you to watch videos and pictures saved on your PC on your TV through a network connection in Media Play mode. This removes the need to copy them to a USB storage device and then connect the device to your TV. To use DLNA, the TV must be connected to the network and the DLNA application must be installed on your PC. ❑❑ Network Connections Diagram PC TV LAN LAN External Modem (ADSL/VDSL/Cable TV) 1 3 2 1. 2. 3.
Install the application 1. Run the Setup.exe file on the Programme CD supplied with the product. NN Alternatively, you can download the file from www.samsung.com. 2. Install the SAMSUNG PC Share Manager as shown in the figures below. ► ► ► ► ► 3. When the installation is complete, the PC Share Manager icon appears on your Desktop. NN Double-click the icon to run the programme. English - 39 BN68-02164A-Eng.
Using the DLNA Application The Programme Screen Layout 1 2 3 4 8 5 6 1. 2. 3. 4. 5. 6. 7. 8. 7 Menus: The following application menus are provided : File, Share, Server, and Help. Click to share the selected PC server folder. Click to cancel sharing. Click to refresh the PC folder and files. Click to synchronize the share status. The folders and files of the PC to be shared are listed. Folders shared by the user are listed.
❑❑ Share Sharing a Folder You can share a folder from your PC to the TV. The maximum number of folders that can be shared is 32. NN Your PC will operate as a server to the TV. •• Method 1: Select a folder in My Computer, select the Share menu and then select the Share Folder sub-menu. •• Method 2: Select a folder in My Computer, right-click over the selected folder and then select Share Folder from the pop-up menu.
Setting the Access Permission To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. In addition, the PC server and the TV must be on the same subnet. •• Method: Select the Share menu and select Set Device Policy. Rejected items are represented in gray. You can change the access permissions by using the Allow Accept / Deny button. To delete an item, select the item and select Delete Item.
Using the DLNA Function Using the DLNA Menu DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over a network to be played. Media Play Media Play enables playing content saved on a USB memory device connected to the TV, while DLNA enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the content are the same as those for Media Play.
Content Library Activating the Content Library 1. 2. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. Press the ▲ or ▼ button to select Content Library, then press the ENTERE button. The Content Library main menu is displayed. Media Play (USB & DLNA) Anynet+ (HDMI-CEC) Application The Content Library enables you to view or play the built-in contents on the TV or stored on your USB device.
Using the Content Library ❑❑ Gallery This function plays a Slide Show with high resolution images and background music and produces various atmospheres. Using the Gallery function of the TV, you can change your home atmosphere. NN Press INFO button to see the credit and detail information in English for the imagery. Press INFO button again or press ► button for the credit information to go away (currently, the credit supports English only).
Network Network Connection ❑❑ Network Connection - Cable LAN Connection for a DHCP Environment The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually. TV Rear Panel The Modem Port on the Wall External Modem (ADSL/VDSL/Cable TV) 1 LAN Cable 2 Modem Cable 1. 2.
LAN Connection for Static IP Environment The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP). TV Rear Panel The LAN Port on the Wall 1 LAN Cable 1. Connect the [LAN] port on the rear panel of the TV and the LAN port on the wall using the LAN cable. You can connect the LAN via a Sharer (Router).
❑❑ Network Connection - Wireless You can connect to the network wirelessly through a wireless IP sharer. TV Rear Panel Samsung Wireless LAN Adapter The LAN Port on the Wall Wireless IP sharer or LAN Cable 1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV. NN You must use the ‘Samsung Wireless LAN Adapter to use a wireless network. NN Samsung’s Wireless LAN adapter is sold separately.
Network Setup ❑❑ Network Type Setup Select Cable or Wireless as the method to connect to the network. NN The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. •• Cable: Connect to network using a cable. •• Wireless: Connect to network wirelessly.
Select a network -- Access Point: You can select the IP sharer to use when using a wireless network. NN If a wireless network is not in the Select a network list, press the Red button. NN When the connection is made, you will be returned to the screen automatically. NN If you have selected an Access Point with a security authentication: Wireless* Network*Setup A The Security Key input screen appears. Enter the security key and press the Blue button on the remote control.
Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ by using a peer to peer network. •• How to connect to new Ad-hoc 1. Choose Select a network, then a device list is displayed. 2. While in the device list, press the Blue button on the remote or select Ad-hoc. NN The message The existing network system may have limited functionality. Do you want to change the network connection? is displayed.
Internet@TV NN This function may not be supported depending on your country. NN If you have some problems while using a widget service, please contact to service provider. In the widget, press the green button and get contact information or refer to help website for service provider information. NN English may be only supported in widget service depending on region. Getting Started with Internet@TV Internet@TV provides SAMSUNG’s widget services through a network connection.
❑❑ System Setup NN Ticker Autorun, Ticker Duration may not be supported depending on country. Change the Service Lock password NN The default password number of a new TV set is ‘0-0-0-0’. NN If you forget the password, press the remote control buttons in the following sequence, which resets the password to ‘0-0-0-0’: POWER (off) → MMUTE → 8 → 2 → 4 → POWER (On). Service Duration Select to set the service duration time before the screen saver appears.
Troubleshooting for internet@TV Problem Possible Solution Some widget services do not work. Check with that service provider. In the widget, press the green button and get contact information or refer to help website for widget service provider information. Refer to Help website page. What is the advantage of single sign on? If you create account and register your login information of desired service, you can access personalized content without additional login.
Home Network Centre Home Network Centre About the Home Network Centre The Home Network Centre connects the TV and mobile phones through a network. You can view call arrivals, text message contents, and schedules set on the mobile phone on the TV using the Home Network Centre. In addition, you can play the media contents saved on the mobile phones such as videos, photos and music by controlling them onto the TV via the network.
Setting Up the Home Network Center ❑❑ Message Shows a list of mobile phones which have been set up with this TV to use the message function (the call arrivals, text message contents and schedules set on the mobile phone). Allowed Allows the mobile phone. Home Network Center Message 111-1234-5671 : Allowed Media 111-1234-5672 : Allowed Setup 111-1234-5673 : Denied 111-1234-5674 : Denied Denied Blocks the mobile phone. Delete Return Exit Deletes the mobile phone from the list.
Using the Message Function Using this function, you can view the call arrivals, text message contents and schedules set on the mobile phone through the alarm window while watching TV. husband SMS NN To disable this Message alarm window, set Message to Off in Setup of the Home NN NN NN NN Network Center. The alarm window appears for 20 seconds. If no key is pressed or if Cancel is selected, it appears up to three times at 5 minute intervals.
Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from the mobile phone will be displayed on the TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the Media Contents are not played.
About Anynet+ Connecting Anynet+ Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. ❑ To connect to a TV TV Anynet+ Device 4 HDMI 1.3 Cable Anynet+ Device 3 HDMI 1.3 Cable Anynet+ Device 2 Anynet+ Device 1 HDMI 1.3 Cable HDMI 1.3 Cable 1.
Setting Up Anynet+ Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC). Application TT Press the TOOLS button to display Tools menu. Media Play (USB & DLNA) Anynet+ (HDMI-CEC) ► Content Library Internet@TV Home Network Center ❑❑ Setup You can set the environment for using Anynet+.
❑❑ Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Device List (device_name) Menu (device_name) Operation Recording: (*recorder) (*recorder) Reserve Recording Stop Recording: (*recorder) Receiver Description Anynet+ mode changes to TV broadcast mode. Shows the Anynet+ device list. Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. 1. 2. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off. NN If your receiver supports audio only, it may not appear in the device list. NN When listening through the receiver, there are restrictions for using the PIP and audio- related (MTS, Preferred language) menus.
Recommendations for Use Teletext Feature Most television stations provide written information services via Teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. NN For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
The teletext pages are organized according to six categories: Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.
Preparing before installing Wall- Mount on the wall Case A. Installing SAMSUNG Wall-Mount Case B. Installing other company’s Wall-Mount 1. Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged if the torque is out of the specified range. 2. Accessory Kit contains Holder–Ring [2] for installing other company’s Wall-Mount on Samsung TV. (Case B) NN Screw down the hole [1] when installing wall-mount on the wall.
2 Assembling the Cables Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand. NN The product colour and shape may vary depending on the model. 1 2 3 ❑❑ Stand Type 3 1 2 1 2 3 3 NN Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand. ❑❑ Wall-Mount Type 1 2 2 1 1 2 2 1 English - 66 BN68-02164A-Eng.
Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture •• •• •• •• •• Normal picture but no sound •• Check the volume. •• Check whether the MMUTE button has been pressed on the remote control. No picture or black and white picture •• Adjust the colour settings.
Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice.
Software License This product uses parts of the software from the Independent JPEG Group. This product uses parts of the software owned by the Freetype Project (www.freetype.org). This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com.
specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities.
7. 8. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code.
copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License.
14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
❑❑ GNU Lesser General Public License (LGPL) GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works.
subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions.
7. 8. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
9. 10. 11. 12. 13. 14. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License.
15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
