Quick Start Guide

English - 11
5
Select Country.
(Depending on the
country)
Select the appropriate country.
✎
After selecting the country in the Country menu, some models
may proceed with an additional option to setup the pin number.
6
Auto Tuning (1):
Selecting how you
watch your TV
Let’s find and store channels on your TV. Do you need to search for
channels?
• Yes, I need to.: All the channels available will be found and stored
on your TV.
• No, I don’t need to.: My set-top box provides all the channels that
are available, so I don't need to search for channels.
7
Auto Tuning (2):
Selecting a search
options and Region
Selection (Depending
on the country)
Select the channel source to memorise. When setting the aerial
source to Cable, a step appears allowing you to assign numerical
values (channel frequencies) to the channels. For more information,
refer to Auto Tuning (Channel Menu → Memorizing Channels) in the
e-Manual.
✎
When Air or Cable is selected first: After all Air or Cable channels
are stored, the step for storing Satellite channels is displayed.
✎
When Satellite is selected first: After all Satellite channels are
stored, the step for storing Air or Cable channels is displayed.
✎
Select Stop at any time to interrupt the memorization process.
8
Clock: Setting the
Clock Mode
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
9
Time Zone
(Depending on the
country): Setting the
your Time Zone
This step is only available when the clock mode is set to Auto.
• Auto: Set the time zone automatically.
• Manual: Set the time zone manually.
✎
If you selected Manual, you can select whether to turn DST
(Daylight Savings Time) On or Off. (Depending on the country)
10
Voice and motion
control: Setting the
Voice and motion
control function.
✎
You can turn the Voice and motion control function On or
Off. Select Off or On, and then select Next. For more detailed
information, refer to “SMART Interaction” (p.17)
11
Setup Complete Select Close to finish.
✎
The completed settings are displayed.
12
Set the Universal
Remote
1. Turn on the POWER button on the bottom of the IR Blaster, and
then press the PAIRING button.
2. Select Ye s to start the Universal Remote Setup.
✎
For more detailed information about the Universal Remote Setup,
refer to "Setting up the Universal Remote Control" section in the
manual (page 30).
If You Want to Reset This Feature...
Menu → System →Setup
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
You should do Setup (Menu → System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby
mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
[PE8000-XU]BN68-04062J.indb 11 2012-04-03  5:29:04