Quick Start Guide

English - 23
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)
Attaching the CI Card Adapter
Attach the adapter as shown below.
To connect the CI CARD Adapter, follow these steps.
✎
We recommend attaching the adapter before
installing the wall mount, or inserting the “CI or CI+
CARD”.
✎
To install the CI card adapter, please remove the
sticker attached to the TV.
1. Insert the CI CARD Adapter into the two holes on the
product 1.
✎
Please find two holes on the rear of the TV. The two holes are beside the COMMON INTERFACE
port.
2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.
3. Insert the “CI or CI+ CARD”.
We recommend that you insert the CI card before you mount the TV on a wall. It may be
difficult to insert after mounting. Insert the card after attaching the CI Card Adapter on TV. It is
difficult to attach the module if you insert the card before attaching.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
• If you don’t insert the “CI or CI+ CARD”, some channels will
display the message “Scrambled Signal”.
• The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
• When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.
TV Rear
To install the CI card adapter, please
remove the sticker attached to the TV.
[PE8000-XU]BN68-04062J.indb 23 2012-04-03  5:29:08