User manual

English - 11
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes. N
1. Press the POWER button on the remote control. The message Select ‘Home Use’
when installing this TV in your home. is displayed.
2. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E
button.
We recommend setting the TV to
N Home Use mode for the best picture in your
home environment.
Store Demo
N mode is only intended for use in retail environments.
If the unit is accidentally set to
N Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3. Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
E
button to conrm
your choice.
4. Press the ▲ or ▼ button to select the Antenna source to memorize. Press the ENTER
E
button to select Start.
Digital & Analogue • : Digital and Analogue channels.
Digital • : Digital channels.
Analogue • : Analogue channels.
The
N
channel search will start and end automatically.
Pr
N
ess the ENTER
E
button at any time to interrupt the memorization process.
A
N
fter all the available channels are stored, the message Set the Clock Mode. is displayed.
5. Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then Press the ENTER
E
button.
If
N
you select Manual, Set current date and time is displayed. (refer to page 25)
If
N
you have received a digital signal, the time will be set automatically. If not, see page 25 to set the clock.
6. The brief instruction on How to get the best performance from your new HDTV is displayed. Press the ENTER
E
button.
You can change previous or next page by pressing the
N
l
or
r
button.
Th
N
is menu is available HD Connection Guide in the Support menu.
7. The message Enjoy your TV. is displayed. When you have nished, press the ENTER
E
button.
If you want to view the TV immediately, select the
N
Watch TV.
If you want to view the
N
See Product Guide, press the ENTER
E
button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is
‘0-0-0-0’.
If
N
you want to change PIN number, refer to 23 page.
The
N Plug & Play feature is only available in the TV mode.
Setup
Plug & Play
►
Time
Game Mode : Off
BD Wise : On
Network Type : Cable
Network Setup
Child Lock : On
Change PIN
Plug & Play
E Enter
Select ‘Home Use’ when installing this TV in your
home.
Home UseStore Demo
BN68-02161A_Eng.indb 11 2009-06-03 �� 1:06:26