User manual
English - 17
Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
N
HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
N
1080 Full HD Motion Demo → Off / On
Samsung' new generation PDP panels deliver stunning Full HD motion clarity when viewing fast action sports, movies, and games.
Film Mode
You can optimize the picture mode for watching movies.
Off • : Turn the lm mode function off.
Auto1 • : Automatically adjusts the picture for the best quality when watching a lm.
Auto2 • : Automatically optimizes the video text when watching a lm.
Film Mode
N is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
Cinema Smooth • : Offers the ultimate cinema experience.
This function is available when the external input connects to HDMI (1920x1080p@24Hz).
N
Real 100Hz Demo → Off / On
You can get a clear distinction between Real 100Hz and 50Hz, especially when watching fast moving scenes. Therefore, when
seeing slow moving scenes, you will not be able to distinguish between Real 100Hz and 50Hz. Demo 100Hz works only with 50Hz
signal. Real 100Hz Demo mode is provided for shop demonstration with special pictures.
Blue Only Mode → Off / On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a blue lter effect that is used to adjust the colour and tint of video equipment such as
DVD players, Home Theaters, etc.
Blue Only Mode
N is available when the picture mode is set to Movie or Standard.
Screen Burn Protection
Congures the Screen Burn Protection Options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Pixel Shift • : To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down (Vertical) and side to side (Horizontal). The Time setting allows you to
program the time between movement of the picture in minutes.
Set
N
Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTEREbutton.
Select the required option by pressing the ▲ or ▼ button, then press the
N
ENTERE button.
Available options:
N
Horizontal, Vertical, Time.
Optimum condition for pixel shift
N
Item TV/AV/Component/HDMI/PC
Horizontal 0~2 2
Vertical 0~4 4
Time (minute) 1~4 min 2 min
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
N
This function is not available in the
N
Screen Fit mode.
Scrolling • : This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern
Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image
on the screen for a long time.
Side Gray • : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides.
Light - : When you set the screen ratio to 4:3, it brightens the left and right sides.
Dark - : When you set the screen ratio to 4:3, it darkens the left and right sides.
Picture Reset → Reset Picture Mode / Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Advanced Settings
Picture Options
Picture Reset
►
Picture
BN68-02161A_Eng.indb 17 2009-06-03 �� 1:06:28