User manual

English - 25
Source List / Edit Name
Source List
❑
Use to select TV or other external input sources such as DVD players or Cable Box / Satellite
receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.
TV  , AV1, AV2, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB.
You can choose only those external devices that are connected to the TV. In the N
Source List, connected inputs will be highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
Using the Colour buttons on the remote with the Source list
N
Red - (Refresh): Refreshes the connecting external devices.
T - TOOLS (Tools): Displays the Edit Name and Information menus.
Press the
O SOURCE button on the remote control to view an external signal source.
TV mode can be selected by pressing the TV button, number buttons (0~9), and the
P < / > button on the remote control.
Edit Name
❑
VCR  / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game /
Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA
You can name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of N 1920x1080@60Hz: is connected to the HDMI IN 2
(DVI) port, you should set the HDMI2/DVI mode to PC in the Edit Name of the Input
mode.
When connecting an HDMI/DVI cable to the
N HDMI IN 2(DVI) port, you should set the HDMI2/DVI mode to DVI or DVI PC in the
Edit Name of the Input mode. In this case, a separate sound connection is required.
Input
Source List
Edit Name
Timer 1 / Timer 2 / Timer 3
❑
Three different on / off timer settings can be made.
On Time • : Set the hour, minute, and Activate / Inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Off Time • : Set the hour, minute, and Activate / Inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Volume • : Set the required volume level.
Source • : Selects TV, TV Memory or USB device.
When you select the
N
TV, you can set the Antenna and Channel.
Antenna - : Selects ATV or DTV.
Channel - : Selects the desired channel.
When you select the
N
TV Memory or USB, you can set the Contents.
Contents - : Selects the desired contents on the TV memory or USB.
Repeat • : Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, or Manual.
When
N Manual is selected, press the ► button to select the desired day of the week. Press the ENTER
E
button over the
desired day and the c mark will appear.
You must set the clock rst.
N
You can set the hour, minute, and channel by pressing the number buttons on the remote control. N
Auto Power Off N
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned
on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too
long time.
BN68-02161A_Eng.indb 25 2009-06-03 �� 1:06:31