User manual

English - 26
Supported Program
Product Guide
❑
(Not available in all locations)
The Product Guide gives you information on the most important features of this TV.
Medi • ⓐ2.0: Content Library Flash, USB2.0 Movie, DLNA Wireless
Picture Quality • : 1080 Full HD Motion, Ultra FilterBright, 100Hz Motion Plus, Cinema Smooth, Picture Mode
Eco-Friendly • : Energy Saving
Self Diagnosis
❑
Picture Test 
If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still
exists.
Does the problem still exist with this test photo?
N appears on the screen.
If the test pattern does not appear or there is noise in the test pattern, select N Yes.
If the test pattern is properly displayed, select No.
Yes • : There may be a problem with the TV. Contact Samsung’s Call Center for assistance.
No • : There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer
to the external device’s user manual.
Sound Test 
If you think you have a sound problem, please perform the sound test.
You can check the sound by playing a built-in melody sound through the TV.
Does the problem still exist with this sound test?
N appears on the screen.
If during the sound test you can hear sound only from one speaker or not at all, select N Yes.
If you can hear sound from the speakers, select No.
Yes • : There may be a problem with the TV. Contact Samsung’s Call Center for assistance.
No • : There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer
to the external device’s user manual.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure
N Speaker Select is set to TV speaker
in the Sound menu.
The melody will be heard during the test even if N Speaker Select is set to External Speaker or the sound is muted by pressing
the MMUTE button.
Signal Information (Digital channels only) 
You can adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
N
Continue to adjust the antenna until you  nd the best position with the strongest signal.
Software Upgrade
❑
To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal
Television signal. It will automatically detect these signals and display the software upgrade banner. You are
given the option to install the upgrade.
By USB

Insert a USB drive containing the  rmware upgrade into TV. Please be careful to not disconnect the power
or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically
after completing the  rmware upgrade. Please check the  rmware version after the upgrades are complete.
When software is upgraded, video and audio settings you have made will return to their default (factory)
settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
By Channel

Upgrades the software using the broadcasting signal.
Standby Mode Upgrade

To continue software upgrade with master power on, select on by pressing the ▲ or ▼ button. 45 minutes after entering standby
mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.
Alternative Software

Replace the current software with the alternative.
HD Connection Guide
❑
The brief instruction on How to get the best performance from your HDTV is displayed. We offer the connection method for HD devices.
You can change previous or next page by pressing the N
l
or
r
button.
Contact Samsung
❑
You can know the Samsung Call center, website and information for product.
TV Side Panel USB Drive
BN68-02161A_Eng.indb 26 2009-06-03 �� 1:06:32