e-Manual

• When using the Record or Schedule Recording function, the actual recording may start a second or two later
than the specified time.
• If the Schedule Recording function is operating while a recording is being made on an HDMI-CEC external device,
the priority is given to the Schedule Recording.
• Connecting a recording device to the TV automatically deletes abnormally saved recorded files.
• If the Sleep Timer or Auto Power Off has been set, the TV will override these settings, continue to record, and
turn off after the recording has ended.
–
Settings General System Manager Time Sleep Timer
– Settings General Eco Solution Auto Power Off
Before using the timeshift function
Timeshift may not be supported depending on the model or geographical area.
• For a USB device for recording, it is recommended to use the USB hard disk that supports USB 2.0 or later and
5,400 rpm or higher. However, RAID-type USB hard drives are not supported.
• USB memory sticks or flash drives are not supported.
• The total recording capacity may differ with the amount of available hard drive space and the recording quality
level.
• If the available storage space falls below 500 MB while both the Schedule Recording and Timeshift functions are
in progress, only the recording will stop.
• The maximum amount of time available for the Timeshift function is 90 minutes.
• The Timeshift function is not available for locked channels.
• Time-shifted videos are played according to the TV settings.
• The Timeshift function may be terminated automatically once it reaches its maximum capacity.
• The Timeshift function requires at least 1.5 GB of free space available on the USB storage device.
- 119 -