Quick Guide
Table Of Contents
- English
- Before Reading This User Manual
- Warning! Important Safety Instructions
- 01 TV Installation
- 02 The Samsung Smart Remote
- 03 Initial Setup
- 04 Troubleshooting and Maintenance
- Troubleshooting
- The TV won’t turn on.
- There is no picture/video/sound, or a distorted picture/video/sound from an external device, or “Weak or No Signal” is displayed on the TV, or you cannot find a channel.
- The remote control does not work.
- The cable or satellite box remote control doesn’t turn the TV on or off or adjust the volume.
- The TV settings are lost after 5 minutes.
- Intermittent Wi-Fi
- Video App problems (Youtube etc)
- What is Remote Support?
- Eco Sensor and screen brightness
- Still image warning
- Caring for the TV
- Troubleshooting
- 05 Specifications and Other Information
- FCC and Warranty Information
Pairing the TV to the Samsung Smart Remote
Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press
and hold the buttons labeled
and
simultaneously for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
To install the batteries, push the rear cover open in the direction of the arrow, and then insert the batteries as shown
• Alkaline batteries are recommended for longer battery life.
English - 11