Owner's Manual

Table Of Contents
Using the TV Controller
You can turn on the TV with the TV Controller button at the
lower right rear corner of the TV, and then use the Control
menu. The Control menu appears when the TV Controller
button is pressed while the TV is On.
The screen may dim if the protective film on the bottom of
the TV is not detached. Please remove the protective film.
Control menu
TV Controller button / Remote control sensor / Motion
Sensor
TV mode
Press: Move
Press & Hold: Select
Art mode
Press: Switch to the TV mode.
In Art mode, the Remote control sensor at the bottom of
the TV remains off.
Setting the sound sensor
You can turn on or off the sound sensor
by using its switch at the lower right rear
corner of the TV.
With the TV on, slide up the switch to turn
the sound sensor on or down the switch
to turn it off.
See the pop-up window on the TV to check whether the
sound sensor is turned on or off.
During analysis using data from the sound sensor, the
data is not saved.
03 Troubleshooting and
Maintenance
Troubleshooting
For more information, see "Troubleshooting" or "FAQ" in the
e-Manual.
> Settings > e-Manual > Troubleshooting or FAQ
If none of the troubleshooting tips apply, please visit "www.
samsung.com" and click Support or contact the Samsung
service center.
This TFT LED panel is made up of sub pixels which require
sophisticated technology to produce. There may be,
however, a few bright or dark pixels on the screen. These
pixels will have no impact on the performance of the
product.
To keep your TV in optimum condition, upgrade to the
latest software. Use the Update Now or Auto Update
functions on the TV's menu (
> Settings > Support >
Software Update > Update Now or Auto Update).
The TV won’t turn on.
Make sure that the AC power cord is securely plugged in
to the One Connect Box and the wall outlet.
Make sure that the wall outlet is working and the remote
control sensor at the bottom of the TV is lit and glowing
a solid red.
Try pressing the TV Controller button at the lower right
rear corner of the TV to make sure that the problem is not
with the remote control. If the TV turns on, refer to "The
remote control does not work."
The remote control does not work.
Check if the remote control sensor at the bottom of the TV
blinks when you press the remote's Power button.
When the remote's battery is discharged, turn over the
remote control to charge with indoor light, or use the
USB charging port.
Try pointing the remote directly at the TV from 5 ft. to 6 ft.
(1.5-1.8 m) away.
If your TV came with a Samsung Smart Remote (Bluetooth
Remote), make sure to pair the remote to the TV.