Owner's Manual

Preventing
the
TV
from
falling
1.
Using
the appropriate
screws,
firmly fasten a set of brackets to the wall.
Confirm that the
screws
are
firmly attached to the wall.
-
You
may
need
additional material
such
as
wall anchors depending
on
the type of wall.
2.
Using
the appropriately
sized
screws,
firmly fasten a set of brackets to
the
TV.
-
For
the
screw
specifications, refer to
"Standard
Screw"
in
the table
on
the previous
page
.
3.
Connect the brackets fixed to the
TV
and
the brackets fixed to the wall
with a durable,
heavy
-duty string,
and
then tie the string tightly.
-
Install
the
TV
near
the wall
so
that
it
does
not fall backwards.
- Connect the string
so
that the brackets fixed to the wall
are
at the
same
height
as
or lower than the brackets fixed to the
TV.
Detach
the
Cover-terminal
stand
from
the
TV
Detach
the
Cover-Clean
Back
terminal
from
the
TV
English
-
10