Owner's Manual

01
TV
Installation
Invisible
Connection
Guide
To
connect the
Invisible Connection
cable
to the
One
Connect
and
your
TV,
take the following steps:
1.
Read
all the instructions below before
you
begin.
2.
Carefully
remove the
Invisible Connector
from its Styrofoam protector.
3.
Carefully unwind the cable (with the
lgJ
icon)
from the
cable
holder of the
Invisible Connection.
Unwind
enough
cable
to
make
the connection between the
TV
and
the
One
Connect
Box.
-
If
you
unwind the
cable
(with
the==
icon)
from the cable holder, the
cable
may
be
entangled or
damaged.
&
DO
NOT
bend
the
One
Connectfiber
optical
cable.
Especially,
do
not
bend
the
cable
at a
right
angle.
You
can
damage
or
break
the
cable.
The
TV
will
not
work
if the
cable
is
broken
or
damaged.
4.
Connect
the connector with the
lgJ
icon
to the
TV,
and
then connect the connector w
it
h
the==
icon
to the
One
Connect
as
shown
in
the illustration
above.
5.
Connect
the
One
Connect
AC
power
cord
to the
One
Connect
and
to a power outlet
as
shown
in
the illustration
above
.
LL·
When
connecting the
Invisible Connection,
use
a bending
cover
to prevent the cable of the
Invisible
Connection
from
being
bent at a
90
deg
r
ee
angle.
Failure
to
do
so
may
cause
damage
to the
cable.
•
When
connecting the
Invisible Connection,
pay
attention to the
shapes
of its connectors
so
that they
are
connected correctly.
Failure
to
do
so
may
cause
product malfunction.
• After connecting the
Invisible Connecti
on,
wind the remaining
cable
around
the Invisible Connection
tube. Just winding or leaving the remaining
cable
as
it
is
may
cause
damage
to the
cable.
•
When
connecting the
Invisible Connection,
be
careful not to twist the
cable
of the
Invisible Connection.
Failure
to
do
so
may
cause
performance degradation
to
the
TV
or
damage
to the
cable.
•
Be
careful not to take the following actions to prevent the Invisible Connection from
being
damaged:
®
®
®
~
.
..
.....
•
Bending
Twisting
Pulling
Stepping
on
CLASS
1
LASER
PRODUCT
•
Caution
- Invisible
laser radiation
when
open
.
Do
not stare into
beam
.
-
Do
not
bend
or cut cabl
es
excess
ive
ly.
-
Do
not
place
heavy
objects
on
the
cable.
-
Do
not disassemble the connector of the
cable.
Pressing on
•
Caution
-
Use
of
controls
or
adjustments or performance of procedures other than those specified
herein
may
result
in
hazardous
radiation exposure.
English
- 7