Owner's Manual
Table Of Contents
Preventing
the
TV
from
falling
1.
Using
the appropriate
screws,
firmly
fasten
a
se
t of
brackets
to the wall.
Confirm that the
screws
are
firmly attached to the wall.
-
You
may
need
additional material
such
as
wall
anchors
depending
on
the type of wall.
2.
Using
the appropriately
sized
screws,
firmly
fasten
a
set
of brackets to the
TV.
-
For
the
screw
specifications, refer to
"Standard
Screw"
in
the table
on
page
8.
3.
Connect
the
brackets
fixed to the
TV
and
the
brackets
fixed to the wall
with a
durable,
heavy-duty string,
and
then tie the string tightly.
- Install the
TV
near
the wall
so
that
it
does
not fall
backwards.
-
Connect
the string
so
that the
brackets
fixed to the wall
are
at the
same
height
as
or
lower than the
brackets
fixed
to the
TV
.
Detaching
the
Clean
back
stand
cover
from
the
TV
English -
10