Owner's Manual

Preventing the TV from falling
1. Us i ng the appropriate screws, firmly fasten a set of brackets to the wall.
Confirm that the screws are firmly attached to the wall.
- You may need additi onal material such as wall anchors depend i ng on
the type of wall.
2. Using the appropriately sized screws, firmly fasten a set of brackets to the
Tv . ··
- For the screw specificati ons, refer to "Standard Screw " in the table on
page 9.
3. Connect the brackets fixed to the TV and the brackets fi xed to the wall
with a durable, heavy-duty string, and then tie the stri ng tightly.
- Install the TV near the wall so that it does not fall backwards .
- Connect the string so that the brackets fixed to the wall are at the
same height as or lower than the brackets fixed to the TV.
Installing a sound bar (sold separately)
When you install a sound bar (3 inches or less in height) on the TV stand, attach the RUBBER-FOOTs to the bottom of
the sound bar before mounting the sound ba r. Make sure that the RUBBER-FOOTs are not out of the stand width. Refer
to the figure below:
TOP BOTTOM
>
English -1 1