User Manual
Table Of Contents
- overview
- Important Safety Instructions
- Recommended PC Specifications
- Recommended Micro SD/SDHC/SDXC Memory Card Specifications
- NAS recommended specs
- What’s Included
- At a Glance (QND-7012R/7022R/7032R)
- At a Glance (QND-7082R)
- At a Glance (QNO-6014R/7012R/7022R/7032R/6084R/7082R)
- At a Glance (QNV-6014R/7012R/7022R/7032R)
- At a Glance (QNV-6084R/7082R)
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
installation & connection
26_ installation & connection
J
`
Before removing the Micro SD card, in <Setup ( )>-<Event>-<Storage>, set the device to <Off> and press the [Apply]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.
1 2 3
4 5 GND
RESET
VIDEO
3.AUDIO IN
2.ALM OUT
1.ALM IN
NETWORK
ACT LINK
RESET
NETWORK
ACT LINK
<QNV-6014R/7012R/7022R/7032R>
NETWORK
LINK
ACT
123 45 67
GND
1 ALARM IN
2 ALARM OUT
5 AUDIO IN
NETWORK
LINK
ACT
12 34 56 7
GND
1 ALARM IN
2 ALARM OUT
5 AUDIO IN
<QNV-6084R/7082R>