User Manual

Clean Cool-Kit’s surface with a smooth cloth or wet cloth,
only after squeeze the wet cloth properly.
Surface
Clean the inside and outside with dry cloth after
disassembling it.
Clean Versatile door shelve, Versatile tray and Versatile bin
with water.
Inside
Solution
◆ Check the power plug and adapter is connected well.
◆ Check Cool-Kits is situated under the area shone directly.
If it is situated under direct sunlight, you must cut sunlight with
the curtain or something.
◆ Check there are heat-emission equipments around Cool-Kits.
Avoid installing Cool-Kits near heat-emission equipments.
◆ Check the main chilled room has too many cosmetics.
Cosmetics Cool-Kits must not be packed.
◆ If you turn on Cool-Kits, it may not cool for 20 minutes after
turned on.
Cosmetic Cool-Kits
doesn't cool at all.
◆ Check it is not installed upon the slanted or uneven place.
You must install it upon the even place.
◆ Check the wall or other objects stop the rear of Cool-Kits.
You must keep the rear of this product 5cm away from the wall
or other objects.
Cool-Kits sounds
strange.
◆ If the adapter is covered with a blanket or carpet, take it away
from Cool-Kits.
◆ It is normal that the adapter gets hot when operating. If,
however, the adapter becomes too hot, it may have a trouble.
You must contact with your agent centre.
The adapter gets hot.
◆ If E1, E2, E3 shows on LCD, it operates but has something
troubles. You must contact with your agent centre.
LCD indicates error.
Problem
How to Clean Troubleshooting
Before cleaning this product, please pull the power plug. Before contacting with your agent centre, check the followings.
They may save you time and expense of an unnecessary call.
◆ You must not clean Cool-Kits with alcohol,
benzene or acetone.
◆ Do not stick something to it. Cool-Kits may
be damaged.
C
C
a
a
u
u
t
t
i
i
o
o
n
n
◆ You are advised to learn how to disassemble
and reassemble before cleaning Cool-Kits.
Refer to page 11.
N
N
o
o
t
t
e
e
E-13E-12