User Manual
Table Of Contents
- FDR_RF5000A_DA68-04132A-01_EN
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- State of California Proposition 65 Warning
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Installation
- Operations
- Main panel
- Setting the desired temperature or function
- Changing the temperature scale
- Turning on or off the ice maker
- Turning on or off the Peak Demand function
- Activating or deactivating the Sabbath mode
- Activating or deactivating the Cooling Off mode
- SmartThings
- SMART GRID Function (Demand Response) (applicable models only)
- Special features
- Maintenance
- Troubleshooting
- LIMITED WARRANTY (U.S.A.)
- Warranty Information (CANADA)
- Regulatory Notice
- Open Source Announcement
- Safety information
- FDR_RF5000A_DA68-04132A-01_MES
- Información sobre seguridad
- Qué debe saber sobre las instrucciones de seguridad
- Símbolos y advertencias de seguridad importantes:
- Advertencia sobre la State of California Proposition 65
- Precauciones importantes de seguridad
- Señales de advertencia importantes para el transporte y el emplazamiento
- Advertencias muy importantes para la instalación
- Precauciones para la instalación
- Advertencias muy importantes para el uso
- Precauciones de uso
- Precauciones para la limpieza
- Advertencias muy importantes para la eliminación de residuos
- Instalación
- Funcionamiento
- Panel principal
- Configurar la temperatura o función deseada
- Cambiar la escala de temperatura
- Encender o apagar la fábrica de hielo
- Encender o apagar la función de pico de demanda
- Activar o desactivar el modo Shabat
- Activar o desactivar el modo Enfriamiento desactivado
- SmartThings
- Función SMART GRID (respuesta a la demanda) (solo para los modelos correspondientes)
- Funciones especiales
- Mantenimiento
- Solución de problemas
- GARANTÍA LIMITADA (EE.UU.)
- Aviso regulatorio
- Información sobre seguridad
- FDR_RF5000A_DA68-04132A-01_CFR
- Consignes de sécurité
- Ce que vous devez savoir au sujet des consignes de sécurité
- Consignes de sécurité importantes et symboles :
- Avertissement de la proposition 65 de l'État de Californie
- Consignes de sécurité importantes
- Symboles d'avertissement importants concernant le transport et le lieu d'installation de l'appareil
- Avertissements importants concernant l'installation
- Installation en toute sécurité
- Avertissements importants concernant l'utilisation
- Utilisation en toute sécurité
- Nettoyage en toute sécurité
- Avertissements importants concernant la mise au rebut
- Installation
- Opérations
- Panneau principal
- Régler la température ou la fonction souhaitée
- Changer d'échelle de température
- Activer ou désactiver la machine à glaçons
- Activer ou désactiver la fonction Demande de pointe
- Activer ou désactiver le mode Sabbat
- Activer ou désactiver le mode Désactivation du refroidissement
- SmartThings
- Fonction SMART GRID (Réponse à la demande) (modèles applicables uniquement)
- Fonctions spéciales
- Maintenance
- Dépannage
- Informations relatives à la garantie (CANADA)
- Avis d'application de la réglementation
- Consignes de sécurité
English 31
Installation
CAUTION
Do not mount the water lter on any part
of the refrigerator. This may damage the
refrigerator.
1. Connect the household water line to the assembled compression tting.
- If you are using copper tubing, slip the compression nut (07) (not supplied) and
ferrule (not supplied) on the copper tubing (not supplied) as shown.
- If you are using plastic tubing (08), insert the molded end (Bulb) of the plastic tubing
(08) into the compression tting.
CAUTION
• If you use plastic tubing (08), do not use it without the molded end (Bulb).
• Leaving the water line disconnected may cause the water valve to produce a buzzing
sound over time. If this is the case, make sure that the ice making function is turned
“OFF” and do not attempt to use the water dispenser.
2. Tighten the compression nut (07) onto the compression tting. Do not over-tighten the
compression nut (07).
3. Turn the water on and check for any leakage. If you nd water drops or leakage in
the connection areas, turn off the main water supply. Check the connections and, if
necessary, tighten.
4. Flush 1 gallon of water through the lter before drinking or using the water from the
refrigerator. (Flush approximately 6 minutes.) To ush, press a large glass or cup against
the water dispenser lever. Fill the glass, empty it, and then repeat.
5. After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that
period of time, throw out the rst 1 or 2 buckets of ice the ice maker makes to ensure
all impurities have been removed from the water line.
NOTE
Only connect the water line to a potable water source.
• If you have to repair or disassemble the water line, cut off
1
/4“ of the plastic tubing to
make sure you get a snug, leak-free connection.
• You can test the water line quickly using a paper cup. Under normal conditions, the
water dispenser can ll a 5
3
/4 oz. (170 cc) cup in about 10 seconds.
Untitled-20 31 2020-11-30 PM 7:17:14