User Manual
Table Of Contents
- FDR_RF5000A_DA68-04132A-01_EN
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- State of California Proposition 65 Warning
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Installation
- Operations
- Main panel
- Setting the desired temperature or function
- Changing the temperature scale
- Turning on or off the ice maker
- Turning on or off the Peak Demand function
- Activating or deactivating the Sabbath mode
- Activating or deactivating the Cooling Off mode
- SmartThings
- SMART GRID Function (Demand Response) (applicable models only)
- Special features
- Maintenance
- Troubleshooting
- LIMITED WARRANTY (U.S.A.)
- Warranty Information (CANADA)
- Regulatory Notice
- Open Source Announcement
- Safety information
- FDR_RF5000A_DA68-04132A-01_MES
- Información sobre seguridad
- Qué debe saber sobre las instrucciones de seguridad
- Símbolos y advertencias de seguridad importantes:
- Advertencia sobre la State of California Proposition 65
- Precauciones importantes de seguridad
- Señales de advertencia importantes para el transporte y el emplazamiento
- Advertencias muy importantes para la instalación
- Precauciones para la instalación
- Advertencias muy importantes para el uso
- Precauciones de uso
- Precauciones para la limpieza
- Advertencias muy importantes para la eliminación de residuos
- Instalación
- Funcionamiento
- Panel principal
- Configurar la temperatura o función deseada
- Cambiar la escala de temperatura
- Encender o apagar la fábrica de hielo
- Encender o apagar la función de pico de demanda
- Activar o desactivar el modo Shabat
- Activar o desactivar el modo Enfriamiento desactivado
- SmartThings
- Función SMART GRID (respuesta a la demanda) (solo para los modelos correspondientes)
- Funciones especiales
- Mantenimiento
- Solución de problemas
- GARANTÍA LIMITADA (EE.UU.)
- Aviso regulatorio
- Información sobre seguridad
- FDR_RF5000A_DA68-04132A-01_CFR
- Consignes de sécurité
- Ce que vous devez savoir au sujet des consignes de sécurité
- Consignes de sécurité importantes et symboles :
- Avertissement de la proposition 65 de l'État de Californie
- Consignes de sécurité importantes
- Symboles d'avertissement importants concernant le transport et le lieu d'installation de l'appareil
- Avertissements importants concernant l'installation
- Installation en toute sécurité
- Avertissements importants concernant l'utilisation
- Utilisation en toute sécurité
- Nettoyage en toute sécurité
- Avertissements importants concernant la mise au rebut
- Installation
- Opérations
- Panneau principal
- Régler la température ou la fonction souhaitée
- Changer d'échelle de température
- Activer ou désactiver la machine à glaçons
- Activer ou désactiver la fonction Demande de pointe
- Activer ou désactiver le mode Sabbat
- Activer ou désactiver le mode Désactivation du refroidissement
- SmartThings
- Fonction SMART GRID (Réponse à la demande) (modèles applicables uniquement)
- Fonctions spéciales
- Maintenance
- Dépannage
- Informations relatives à la garantie (CANADA)
- Avis d'application de la réglementation
- Consignes de sécurité
English 43
Operations
Using the Energy Management Function
The Energy Management function enables you to control and monitor your Energy
Management refrigerator using the SmartThings app for your convenience.
NOTE
• To use the Energy Management refrigerator functions, you have to install the
corresponding app rst.
1. Operational Status
- You can check the DR and Peak Demand Off (Override mode) status.
2. Energy Consumption Reporting
- Shows the accumulated power consumption. Power consumption data is updated
every 10 minutes.
NOTE
The energy consumption report may differ from the power consumption specications of
the product depending on the operating environment and the stored food.
3. Delay Defrost Capability
- The Delay Defrost Capability function saves energy by delaying the defrost
operation to a time specied by the user. You can congure the time. and this
function will save energy during the specied period in a 24 hour cycle. If the time
is not set, the function works with the default time settings. The default time settings
are below:
- 6 am to 10 am: 1st. November ~ 30th. April
- 3 pm to 7 pm: 1st. May ~ 31th. October
To change the time setting for the Delay Defrost Capability
You can change the time setting for the Delay Defrost Capability on the app.
Provision for Open Access to the Connected Product Requirements
1. SGIP Open Standards (Smart Energy Prole 2.0 - http://www.csep.org/)
- Energy Consumption Reporting
- Demand Response
2. Samsung OPEN API
- Operational Status, User Settings & Messages
- ICE Maker Status: GET /icemaker/status/vs/0
- Door Open Alarm: GET /doors/vs/0
- DR Status: GET /drlc/vs/0
- Delay Defrost Capability
- Set Schedule of the Defrost Delay: POST /defrost/reservation/vs/0?op=add
- Get Schedule of the Defrost Delay : GET /defrost/reservation/vs/0
- Delete Schedule of the Defrost Delay: POST /defrost/reservation/vs/0?op=remove
- Defrost Delay On/OFF: POST /defrost/delay/vs/0
Untitled-20 43 2020-11-30 PM 7:17:16